Contact us! DE: +49 89 20190324 | AT: +43 720 775089 |
office@hardwarewartung.com
HP ProLiant DL380p Gen8 25 SFF Configure-to-order Server
RACK
This factory integrated model ships with:
2 x HP Smart Socket Guides for fast processor installation.
24 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
1 FlexibleLOM connector
Smart Array P420i Controller w/ Zero Memory (ZM)
I/O slots - 3 Slots come standard:
Slot 1 - FL/FH x16 PCIe 3.0 (x16 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 3 - HL/FH x4 PCIe 2.0 (x8 connector)
Additional Slots may be added
System Fans - 4 (2 additional fans included with second processor)
Drive Cage - 25SFF (with built-in expander)
USB - 4 Rear, 1 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
Part number: 665554-B21
Notes
All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
Power Supply & Rail Kit not included.
Customers cannot select the 130W or greater processors in this configure-to-order model.
Processors consuming 115W power require the use of DIMM blanks and do not support LR-DIMMs.
This chassis comes with a built-in expander. All drives can be driven off of the embedded P420i controller.
Customers must add a minimum of a 512MB controller cache module when choosing this CTO server.
If a P822 controller is required, it cannot be populated in slot 3.
If a P430 controller is required, it cannot be populated in slots 3 or 4.
GPU options are not supported in this CTO server.
Will not be able to get an optical drive, SID, second front USB, and ID label.
Power Supply & Rail Kit not included.
Customers cannot select the 130W or greater processors in this configure-to-order model.
Processors consuming 115W power require the use of DIMM blanks and do not support LR-DIMMs.
This chassis comes with a built-in expander. All drives can be driven off of the embedded P420i controller.
Customers must add a minimum of a 512MB controller cache module when choosing this CTO server.
If a P822 controller is required, it cannot be populated in slot 3.
If a P430 controller is required, it cannot be populated in slots 3 or 4.
GPU options are not supported in this CTO server.
Will not be able to get an optical drive, SID, second front USB, and ID label.
Part of the following server:
Specs
Disksize
SFF
Max. Amount (without options)
25
Drive Cage
25-SFF
Fans
4 (2 additional fans included with second CPU)