HP ProLiant DL380e Gen8 25 SFF Configure-to-order Server

RACK

This factory integrated model ships with:
2 x HP Smart Socket Guides for fast processor installation.
12 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller with Zero Memory (ZM)
I/O slots - 4 Slots ship standard:
Slot 1 - FL/FH x4 PCIe 3.0 (x8 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x16 connector)
Slot 3 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 4 - Low Profile x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and Options subsection
System Fans - 4 (one additional fan included with purchase of second processor)
Drive Cage - 25-SFF
USB - 4 Rear, 2 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)

Part number: 669256-B21

Notes
The DL380e ships standard with the Dynamic Smart Array B120i controller which provides support for up to 6 SATA drives (greater than 4 drives requires additional cable, p/n 675856-B21) and data transmission speeds up to 3Gb/s. Customers requiring SAS support or greater than 6 drives should select either a Smart Array family controller or the HP Dynamic Smart Array B320i controller (p/n 661402-B21, implemented via riser).

When the SAS-enabled riser board with the Smart Array B320i controller is installed in the server, the embedded Smart Array B120i controller is automatically disabled. In the absence of another storage controller or an expander backplane, front drives operate in ACHI or Legacy mode. In these two modes, the drives are not part of a hardware RAID or a member of a logical drive. The Locate, Drive status, and Do not remove LEDs in the drive carrier are disabled.

This CTO server includes an "expander-based" storage backplane. A single Smart Array P420 is capable of controlling all 25 SFF drives and optional rear drives.
Part of the following server:
Specs
Disksize
SFF
Max. Amount (without options)
25
Drive Cage
25-SFF
Fans
4 (1 additional fan included with second CPU)