Contact us! DE: +49 89 20190324 | AT: +43 720 775089 |
office@hardwarewartung.com
HPE DL380 Gen9 Graphics Enablement Kit
HPE Computation and Graphics Accelerators
Part number: 719082-B21
Notes
This GPU enablement kit includes 2 Heatsinks and 8 cables to enable double wide GPUs to be supported.
For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card for cards over 150W. Cards 150W or under can used 800W Power Supplies; however check the power usage via the HPE Power Advisor Tool located at http://www.hpe.com/info/hppoweradvisor.
There are limitations on the chassis and processor supported when adding Graphics accelerators.
Passive cards will require the addition of the High Performance Fan Kit (719079-B21).
We support up to 2 Double wide and 3 single wide Graphics cards, limitations apply.
This kit support up to 2 double wide Graphics cards.
Double Wide GPUs will occupy slots 2 and 5 and will leave only 2 slots left open.
There are limitations on GPU support (1x double wide) with the NVMe bay installed.
All Accelerators are restricted to less than 1024GB for system host memory, with the exception of the Tesla P100, AMD and Intel cards.
This kit includes PCIe GPU Retention Brackets that need to be installed on the air baffle to support FL cards.
Not required for M2000.
For doublewide GPU support you are required to have at least 1x1400W Power Supply (720620-B21), per card for cards over 150W. Cards 150W or under can used 800W Power Supplies; however check the power usage via the HPE Power Advisor Tool located at http://www.hpe.com/info/hppoweradvisor.
There are limitations on the chassis and processor supported when adding Graphics accelerators.
Passive cards will require the addition of the High Performance Fan Kit (719079-B21).
We support up to 2 Double wide and 3 single wide Graphics cards, limitations apply.
This kit support up to 2 double wide Graphics cards.
Double Wide GPUs will occupy slots 2 and 5 and will leave only 2 slots left open.
There are limitations on GPU support (1x double wide) with the NVMe bay installed.
All Accelerators are restricted to less than 1024GB for system host memory, with the exception of the Tesla P100, AMD and Intel cards.
This kit includes PCIe GPU Retention Brackets that need to be installed on the air baffle to support FL cards.
Not required for M2000.
Part of the following server: